iso
Select Language:

Recommended Laying Methods

Your Position :Laying Methods

Wall Tiles Laying Methods

fenix ceramicUse cement and sand mortar in the ratio of 1:3 proportions for interior and 1:4 proportions for exterior     applications.
fenix ceramicPrepare thick cement paste by mixing water & cement. Apply this paste on the backside of the tile to fix it.
fenix ceramicMark the level at a height of 3?-0? from the bottom of the wall and draw a horizontal line.
fenix ceramicPrepare the mortar of any good brand of tile fixing adhesive as per the method suggest by adhesive     manufacturer.
fenix ceramicApply the mortar on the wall with the help of notched trowel. (The width of notch will be recommended by the     adhesive manufacturer).
fenix ceramicFixing of tile has to be done with minimum gap of 5 mm to 15 mm. We do not recommend tiles to be laid     without gap.
fenix ceramicFix the tiles on the marked line to level and ram it properly with the help of hammer or rubber trowel so that it     gets fixed properly.
fenix ceramicutmost care has to be taken while fixing other tiles. The joint gap and line has to be maintained while fixing     other tiles.
fenix ceramicIt is recommended to use gap rod of required thickness and string for maintaining line.

Floor Tiles Laying Methods

fenix ceramic Prepare base mortar by mixing sand and cement in 4:1 proportions.
fenix ceramicLay the mortar on the substrate prepared as mentioned above in required line and level. It should be noted that    in any case the bed mortar thickness should be more than 1? thickness.
fenix ceramicMark the centerline and fix the tiles on all the corners and center in the required level. Preferably, start fixing tiles     parallel to longer span.
fenix ceramicPrepare thick cement paste by mixing water & cement. Apply this paste on the backside of the tile to fix it.
fenix ceramicfixing of tile has to be done with minimum gap of 8mm. We do not recommend tiles to be laid without gap.
fenix ceramicLay the tiles on this firm base and ram lightly with the help of rubber hammer or trowel from top. See that the tile    top surface is laid in required line and level with proper joint gap.
fenix ceramicUtmost care should be taken while fixing other tiles in terms of matching lines and keeping exact joint width    between tiles. (For maintaining joint width spacers are recommended of required joint thickness).

Quick Link

fenix ceramic